You were right. Something was wrong. My girls were both down for naps and the Internet wasn't working. And I had a really good audiobook, so obviously the only option was to break out the sewing machine.
Desperate times and all that.
I got this shirt from SheInside and I really loved it, but the sleeves were too wide for my arms, plus I kind of liked the idea of making the sleeves a little shorter (sleeves that hit above the elbows are basically my favorite thing of all time. Right next to ice cream and sleeping babies).
By the time my girls woke up, my shirt was all finished. And my Internet was still down.
If you are inclined to take on such an amazingly (not) difficult project yourself, here's how:
1. Use a seamripper or very sharp scissors to unpick the cuffs from the sleeve.
2. Try on your shirt and mark where you want the top of the cuff to hit on the sleeve. Cut your sleeves one inch longer than that.
3. Sew a loose seam around the cut edge, about 3/4 of an inch from the bottom, leaving several inches of thread on each end of your seam.
4. Carefully gather your sleeve by pushing the fabric along the loose stitching until it's the same width as your cuff and the fabric is evenly distributed along the thread.
5. Fold your cuff with right sides together and sew a seam from top to bottom so it's the right width to go around your arm. (Don't make it so tight that it won't slide over your elbow). Repeat on second cuff.
6. Flip your cuff inside out and slip it around the bottom of the sleeve with the raw edges of the sleeve and the cuff together. Pin it to keep it all in place. Sew around the cuff and sleeve to attach them together.
7. Zig-zag or serge the raw edges, flip the cuff down and ta-da. Done!
Shirt: c/o SheInside // White Jeans: H&M